Detector Presets¤
get_H1(), get_L1() and get_V1() return single detectors with the site coordinates, arm azimuths and tilts written in jimgw/core/single_event/detector.py.
get_ET(), get_ET_2L() and get_CE() return GroundBased3G detectors, which respond like GroundBased2G unless earth_rotation or finite_arm_length is switched on (see the data guide).
Einstein Telescope (Triangular detectors)¤
get_ET() returns three detectors, ET1, ET2 and ET3, with 10 km arms and 60 degrees between the two arms of each.
ET1 is at the Euregio Meuse-Rhine site (about 50.723 N, 5.921 E, at zero elevation), the point of ET_EMR below, with its x-arm at the azimuth of the Virgo x-arm.
ET2 and ET3 are the other two corners of an equilateral triangle with 10 km sides.
Each corner is found by moving 10 km from the previous one in the direction of its x-arm, along a great circle (haversine formula) on a sphere whose radius is the WGS-84 radius at that latitude.
The arms are rotated by 240 degrees from one corner to the next.
Einstein Telescope (2 L-shaped detectors)¤
get_ET_2L() returns two L-shaped detectors with 15 km arms and 90 degrees between the two arms of each: ET_Sar in Sardinia (about 40.517 N, 9.417 E) and ET_EMR in the Euregio Meuse-Rhine (about 50.723 N, 5.921 E), both at zero elevation.
The sites and the way the angle is measured follow Branchesi et al. (2023).
The arms of ET_Sar have the azimuths of the Virgo arms.
Those of ET_EMR are rotated from them by alignment_angle, in degrees: 0 for parallel arms and 45 for the misaligned case of that paper.
The default is 42.5.
The rotation is a difference of azimuths, each measured against the local axes of its site rather than against the great circle between the sites.
load_and_set_psd() sets the 15 km ET baseline ASD for them; see Default design-sensitivity ASD.
Cosmic Explorer¤
get_CE() returns one detector with 40 km arms at the LIGO Hanford site, with the coordinates, elevation and arm tilts of H1.